Wind power plants, aka wind farms, are the foundation for wind energy production. In order to transport the generated electricity to the underground grid, there must have some electrical components inside the wind turbine towers, such as cables; and in order to maintain and overhaul the wind energy generation system, there must also have some supplemental components inside the wind turbine towers, such as ladders, platforms.

There are many different kinds of internal components inside wind turbine towers, therefore, we give them a general term called wind turbine tower internals to better organize them.

To better our wind turbine tower solution service, Anyang Machinery provides a one-stop wind tower solution service, which includes wind turbine tower, wind tower flange, wind turbine tower kit.

Wind Turbine Tower Electrical Internals

Anyang Machinery provides complete wind turbine tower electrical internals kittings which includes: internal light kitting, internal cable kitting, and cabinet assembly.

Internal Light Kitting of Wind Turbine Tower

Tower & Nacelle Light

Voltage: 85V – 265V

Power: 20W

Protection Grade: IP65, IP67

Optical source: LED, fluorescent

Service life: 50000 hours

Install interface: waterproof

Certification: CE, ROHS

wind turbine tower light

Door Light

Voltage: 90V – 220V

Power: 10W

Protection Grade: IP65, IP67

Optical source: LED, fluorescent

Service life: 70000 hours

Certification: CE

wind turbine tower door light

Flood Light

Voltage: 220V

Power: 50W

Protection Grade: IP65, IP67

Optical source: LED

Service life: 70000 hours

Certification: CE, ROHS

flood light for wind turbine tower

 

Aviation Light

Voltage: 220V

Power: 10W, 50W, 60W

Protection Grade: IP65

Optical source: HID light

Flash Frequency: 20 – 60 times per minute

Service life: 100000 hours

Certification: CE, ROHS

 

 

aviation light for wind turbine tower

Light Bracket

Dimension: customize

Voltage: 220V

Input Power: 10W – 60W

Protection Grade: IP33

Materials: hot-rolled steel

Certification: CE, ROHS

wind turbine tower light bracket

 

Plug & Play

Dimension: customize

Voltage: 110V – 220V

Input Power: 10W – 60W

Protection Grade: IP65

Materials: PC (lampshade), stainless steel (clip & holder)

Install interface: waterproof

Certification: CE, ROHS

 

wind turbine tower internal light plug & play

Internal Cable Kitting of Wind Turbine Tower

Single Core Screened Dual Jacketed Cable

Cable Types

Used in wind turbine: flexible cable, control cable, TRVV cable, data cable, etc.

Used in wind turbine tower: lighting cable, travelling cable, etc.

Cable Characteristics

Operating environment: long term outdoor running, vertical suspension installation, frequent reverse, touch of greasy (partial), seawater corrosion (offshore wind turbine towers)

Vertical installation characteristics: high mechanical strength, flexible (torsion resistance), oil proof, low temperature resistant

wind turbine tower single core cable

Anti-twist Cable

Cable Types

Used in wind turbine: flexible cable, control cable, TRVV cable, data cable, etc.

Used in wind turbine tower: lighting cable, travelling cable, etc.

Cable Characteristics

Operating environment: long term outdoor running, vertical suspension installation, frequent reverse, touch of greasy (partial), seawater corrosion (offshore wind turbine towers)

Vertical installation characteristics: high mechanical strength, flexible (torsion resistance), oil proof, low temperature resistant

 

anti-twist cables for wind turbine tower

High Flexible Anti-twist Cable

Cable Types

Used in wind turbine: flexible cable, control cable, TRVV cable, data cable, etc.

Used in wind turbine tower: lighting cable, travelling cable, etc.

Cable Characteristics

Operating environment: long term outdoor running, vertical suspension installation, frequent reverse, touch of greasy (partial), seawater corrosion (offshore wind turbine towers)

Vertical installation characteristics: high mechanical strength, flexible (torsion resistance), oil proof, low temperature resistant

high flexible anti-twist cable for wind turbine tower

 

Cable Tie

Material: polyamide

Length: 800 – 1200mm

Width: 2 – 9mm

Other dimension: customized

Color: white, black, colorized

Performance: minus 40 degree cold resistance, 150 degree heat resistance, 180 degree heat resistance

Certification: UL, SGS, SONY, PFOS

 

wind turbine tower cable tie

Cable Tray

Material: aluminum alloy, carbon steel, stainless steel, GI, FRP

Type: wire mesh cable tray, perforated cable tray, cable ladder, cable trucking

Surface treatment: hot zinc dipping, cold zinc dipping, power coating, plastic spraying, paint spraying

Surface protection: corrosion resistance, fire proof, moisture proof

Certification: UL / CE

 

Cable Lugs

Material: brass, red copper, aluminum

Standard: GB, NF, DIN, ISO

Size: customized

Surface treatment: silver coating

Certification: ISO9001

 

wind turbine tower cable lugs

Internal Electrical Cabinet Kitting of Wind Turbine Tower

Junction Box

Dimension: customize

Type: one input & three outputs, 15 A8-position terminals block

Protection Grade: IP66

Certification: CE, ROHS

junction box for wind turbine tower cable kitting

 

Enclosures

Optional terminal blocks:

UK terminal block,  TB terminal block, ceramic terminal block, double layered terminal block, earthing terminal block, pressure terminal block, quick connect terminal block, flat terminal block (paired with circuit board), double row terminal block (paired with circuit board), UK short terminal strip, TB short terminal strip, TBC terminal block (can be reassembled).

Optional cable joint:

white PG joint, black PG joint, casing joint, hose joint, steel joint.

cable kitting enclosures

Wind turbine tower Infrastructure Internals

Anyang Machinery provides complete wind turbine tower infrastructure internal components, such as wind turbine tower door, stairway, and spare part such as fastener.

Wind Turbine Tower Infrastructure Internals

Wind Turbine Tower Stairway

Material: quality steel or aluminum

Size: customized

Surface Treatment: corrosion resistance

Certification: ISO9001

wind turbine tower entrance stairway

Wind Turbine Tower Door

Material: quality steel or aluminum

Size: customized

Components: door frame, door, door lock

Opening direction: left or right

Surface Treatment: corrosion resistance

Certification: ISO9001

door of wind turbine towers

Wind Turbine Tower Platform

Material: quality steel or aluminum

Size: customized

Surface Treatment: corrosion resistance

Certification: ISO9001

internal platform for wind turbine tower

Wind Turbine Tower Railing

Material: quality steel or aluminum

Size: customized

Surface Treatment: corrosion resistance

Certification: ISO9001

internal railling for wind turbine tower

Wind Turbine Tower Ladder

Material: quality steel or aluminum

Components: ladder holder, ladder, protect system

Size: customized

Surface Treatment: corrosion resistance

Certification: ISO9001, OSHA

internal ladders for wind turbine towers

Wind turbine tower fasteners

Application: wind turbine, wind turbine blade, wind tower, wind tower foundation

Standard: DIN, GB, ANSI, BS, AS, ISO

Level: 10.9

Dimension: customized

Surface treatment: dacromet, zinc coat, black oxide coating

Certification: ISO9001

internal fasteners for wind turbine tower

Anyang Machinery provides complete customized wind turbine tower solutions, the dimension of wind turbine tower, foundation structure, and wind turbine tower internals will be manufactured fully based on customers’ requirements. If you have any questions about wind turbine tower internals, please feel free to contact us.